Eureka Mignon Single Dose FAQ

A simple know-how on Eureka's latest single dose grinder

You've finally got your hands on the new Eureka Mignon Single Dose. However, before you begin grinding your favourite beans, there are a few tips and know-how that every home barista should keep in mind.

To start off, let's check what's in the box :

• Eureka Mignon Single Dose Grinder

• Bellow

• Dosing cup

• Dosing cup holder

• Hopper (with plastic lid)

• Wooden lid

• Wooden base for dosing cup

The Eureka Mignon Single Dose features the Silent Technology that produces less than 60 dB of noise, ensuring your morning ritual does not disrupt your loved ones' precious sleep.

How to use :

• Weigh the desired amount of coffee

• Check that the bean hopper tab is closed and then insert the coffee into the bean hopper

• Make sure to set the appropriate grind size by adjusting the knob at the top

• Once you have started the grinding with the side button, open the tab at the hopper

• As soon as the last coffee bean has dropped into the grinding chamber, close the tab again

• Once the coffee no longer comes out of the outlet chute, keep the tab closed and push the Blow Up System applied on the bean hopper, for the time necessary to clean the grinding chamber

• Turn off the grinder

• Eureka suggests not grinding any more than 160 grams at one time to avoid overheating

• You should wait at least 10 minutes or longer before you may continue grinding

If you need a visual guide on how to use the grinder, you can check out this Best Practice video by Eureka:

How to clean :

• Turn the grinder off and unplug from the power

• Remove the hopper

• Remove the Eureka logo to reveal the screw

• Undo the screw at the back holding the plate down

• To access the burr chamber, remove the 2 screws

• You may now clean your grinder

• It is recommended to use a small vacuum to avoid any spills in the grinder

• If vacuum is unavailable, make sure to use brush and dry cloth as any dampness can cause retention

• Put it all back in reverse once you are done with cleaning

There are 3 screws in total that need to be removed before cleaning. One behind the Eureka logo, and two on top of the burr.

P/S : Like all Eureka grinders, you do not have to recalibrate the grind setting as you will only clean the top burr that is not fixed.

We hope this FAQ was helpful in aiding you with your new grinder! You can also give us a call or chat on our website if you require additional information. Do let us know if you have any feedbacks.

Stay tuned for more articles, FAQs, and tips!